STABLES - PRICES & INFORMATION

Erecting
- Fitting and bolting down to customers ready prepared single course of brickwork.
- Damp proof membrane attached to underside of timber to prevent moisture rising.

Height
- Height to eaves 7'3 (2210mm).
- Height to ridge 9'3 (2820mm)

Framing
3" x 2" (75 x 50 mm) Cls selected and graded Scandinavian timber set approx 23" (590mm) centres,coach screwed or bolted at panel joints.

Cladding
19mm x 125mm selected tongue and groove shiplap, pressure treated and fastened with rust resistant nails.

Stable Doors
- Total height 82" x 48"  (2083mm x 1200mm) wide x 2 ½ (65mm) wide.
- Lower door 48"  (1200mm) high with angled top, anti chew strip, osb kickboard and kick over bolt.
- Top door ledged and braced 3" x 2" (75mm x 50 mm) with 22mm tongue and groove boards.
- Both doors fitted with galvanised Brenton pad bolts , galvanised cabin hooks and 18" galvanised heavy duty hinges.

Roof Purlins
- 4" x 2" (100 x 50mm) Cls Scandinavian selected and graded timber, spaced at 24" (590mm) centres and sitting on prefabricated 3" x 2" (75 x 50mm) apex frames.

Gable Ends
- All gable ends finished with tannalised barge boards and finials.

Roof Cladding
- Onduline which is an extremely durable roofing sheet available in assorted colours.
- Black supplied as standard and comes with a  manufacturers 15 year  warranty.

Roof Lights
- One clear sheet per stable fitted in place of Onduline sheet.

Canopies
- Canopies extend to 4ft (1220mm) strengthened with diagonal bracing. The underside of canopy is boarded in.

Kickboards
- 15mm sterling board, splinter and moisture resistant, fitted to 4ft (1220mm) high with horizontal stud work between framing.

Tack rooms
- Dividing walls fully lined to ridge for improved security.

Windows
- Perspex windows fitted with 2" x 2" galvanised weld mesh fitted on the inside.

Guttering
- Black 4" (100mm) half round guttering and down pipes fitted to front only.

All prices include VAT

Terms
- Free delivery within 40 miles of Stafford - please contact us for delivery charges outside this area.
- Our delivery vehicles require access up to the stable base. If this is not possible please advise at the time of order.
- Site work and base preparation are the customers responsibility . An unsuitable base will result in the stable not being erected and further call out charges being made for second visits.
- All timber sizes are nominal (ie before machining) and we reserve the right to change our design and specification without notice.